| Double Compression Cable Gland (SDC Series) | |||
|---|---|---|---|
| Sizes | SDC 1/2” TO SDC 4” OR SDC M12 TO SDC M100 | Entry Thread | BSC ET |
| Alternate Thread | METRIC, NPT, PG, BSP | Gland Material | Brass (IS-319) |
| Alternate Material | Aluminium, S. S., M. S. | Operating Temperature | -30 C to +100 C |
| Finish | Alternate Finish | Nickel Plated | Tin, Chrome | Seal Material | NATURAL / NITRILE |
| Seal Shore Hardness | 50-60 | Accessories | SHROUD, EARTH TAG, STOPPER, REDUCER, ADAPTORS (SUPPLIED SEPARATELY UPON REQUEST) |
| Gland Standard | IS/IEC 60529 : 2001 & BS 6121 | Ingress Protection | IP 66 AS PER IS/IEC 60529:2001 (Reaffirmed : 2014) |
| Approval | SECURE SDC SERIES CABLE GLANDS ARE APPROVED BY CSIR-CENTRAL INSTITUTE OF MINING AND FUEL RESEARCH - DHANBAD - KARANDIKAR LEBORATORIES PVT LTD. | Certificate No. | CIMFR/TC/P/H29 and KLPL/BTG/12-34 TO 37 R1 |
| No. | SIZE SDC SERIES |
H | G | E | F | C | D | CABLE DIMENSIONS | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (THREAD) | ||||||||||
| (A/F) | (A/C) | ET | MM | (THREAD LENGTH) |
"A" UNDER ARMOUR DIA |
"B" OVER ALL DIA |
||||
| 1 | SDC 12 MM | 14.50 | 10.00 | 21.50 | 23.50 | 1/2"ET, 5/8"ET | M12, M16 | 24 | 8.00 | 13.50 |
| 2 | SDC 16 MM | 16.00 | 12.00 | 22.50 | 26.00 | 3/4"ET | M20 | 24 | 10.00 | 15.00 |
| 3 | SDC 19 MM | 18.50 | 13.00 | 25.50 | 29.50 | 3/4"ET | M20 | 24 | 12.00 | 17.50 |
| 4 | SDC 22 MM | 20.00 | 14.50 | 27.50 | 32.00 | 3/4"ET | M20 | 24 | 13.00 | 19.50 |
| 5 | SDC 25 MM | 23.50 | 18.50 | 31.00 | 36.00 | 1"ET | M25 | 24 | 16.50 | 23.00 |
| 6 | SDC 28 MM | 26.50 | 20.50 | 34.00 | 39.50 | 1.1/8"ET | M32 | 24 | 18.50 | 26.00 |
| 7 | SDC 32 MM | 31.00 | 25.00 | 41.00 | 47.50 | 1.1/4"ET | M32 | 24 | 23.00 | 30.00 |
| 8 | SDC 35 MM | 36.00 | 28.00 | 44.50 | 51.50 | 1.3/8"ET | M40 | 24 | 26.00 | 35.00 |
| 9 | SDC 38 MM | 38.00 | 31.00 | 47.00 | 54.00 | 1.1/2"ET | M40 | 24 | 29.00 | 37.00 |
| 10 | SDC 45 MM | 46.50 | 38.50 | 56.50 | 65.00 | 1.3/4"ET | M50 | 24 | 36.50 | 45.50 |
| 11 | SDC 50 MM | 49.00 | 42.00 | 61.00 | 70.50 | 2"ET | M50 | 24 | 40.00 | 48.00 |
| 12 | SDC 57 MM | 58.00 | 49.50 | 67.50 | 77.50 | 2.1/4"ET | M63 | 24 | 47.50 | 56.00 |
| 13 | SDC 63 MM | 63.50 | 55.50 | 74.50 | 86.00 | 2.1/2"ET | M63 | 24 | 53.50 | 62.50 |
| 14 | SDC 70 MM | 68.50 | 64.50 | 82.50 | 95.50 | 2.3/4"ET | M75 | 24 | 62.50 | 68.00 |
| 15 | SDC 75 MM | 77.00 | 68.50 | 92.00 | 106.50 | 3"ET | M75 | 24 | 66.50 | 75.50 |
| 16 | SDC 82 MM | 78.50 | 70.50 | 92.00 | 106.50 | 3.1/4"ET | M82 | 24 | 68.50 | 78.00 |
| 17 | SDC 88 MM | 88.00 | 78.00 | 101.00 | 117.00 | 3.1/2"ET | M88 | 24 | 76.00 | 86.00 |
| 18 | SDC 100 MM | 101.00 | 89.00 | 116.00 | 133.50 | 4"ET | M100 | 24 | 87.00 | 98.00 |
ALL DIMENSIONS ARE IN MM. GENERAL TOLERANCE: -/+ 1.0 MM
We are always looking for new & creative opportunity to serve the society better.